Search:

Type: Posts; User: Lancealot1969

Page 1 of 8 1 2 3 4

Search: Search took 0.05 seconds.

  1. It was easy to get it off but you do need to buy...

    It was easy to get it off but you do need to buy a E5 reverse torx socket, now the one I got was £6.49 off ebay and it came with a full set on a socket rail with about ten other sizes. You will need...
  2. Well thats a dash with no Amber or Red lights on...

    Well thats a dash with no Amber or Red lights on as just took the ABS module off resolderd the pins and refitted it all good :-)

    L
  3. Replies
    2
    Views
    53

    Found this...

    Found this http://jimbutterworth.co.uk/8headlights.htm
    All credit to Jim for this, found it useful and gives a insight HOW to adjust the x308 lights but I need to find the the left and right hight...
  4. Replies
    2
    Views
    53

    Head light alignment

    Hi,

    Been looking on JagRepair for any details for realigning the front headlights ??
    Went out on Saturday with my xj8 took the girls to a spa for her birthday and I followed the wife in my Kuga....
  5. Had her out for a run and im thinking the pump...

    Had her out for a run and im thinking the pump isnt running, when your driving and the heater is on your getting heat in the cabin.
    As soon as you stop and let it idle it cools down again. I also...
  6. Had her out for a run and im thinking the pump...

    Had her out for a run and im thinking the pump isnt running, when your driving and the heater is on your getting heat in the cabin.
    As soon as you stop and let it idle it cools down again. I also...
  7. Had her out for a run and im thinking the pump...

    Had her out for a run and im thinking the pump isnt running, when your driving and the heater is on your getting heat in the cabin.
    As soon as you srop and let it idle it cools down again.I also...
  8. Just checked the cuse and its ok, also checked...

    Just checked the cuse and its ok, also checked for power ar the plug to the pump and got 44.ma so there is power there.
    Next was the screwdriver to the ear and could hear something ?? But not sure...
  9. Good morning Andy, Going to have a go again,...

    Good morning Andy,

    Going to have a go again, will check F15 and feel for any vibration from the pump. Then will pull the conector and test it with my idiot proof one button multimeter ;-) and test...
  10. Hi, Now im sctatching my head. Decided to...

    Hi,

    Now im sctatching my head. Decided to check all fuses in sngine bay and all were ok. Must be something simple that I have missed, will check first thing in the morning. Would I damage anything...
  11. Hi Andy, Front and rear fogs work fine,...

    Hi Andy,

    Front and rear fogs work fine, checked all fuses in engine compartment all ok.
    Can't find a fuse for the pump in book and im having trouble finding the fuses on jagRepair. Getting nearer...
  12. Think this could be my next project,...

    Think this could be my next project, http://jagrepair.com/HeaterPumpMotor.htm

    Jimbov8 did say I will get there in the end ;-) got to keep plugging away at it.

    All the best

    Lance ;-)
  13. Think it could be the auxillary pump Andy, got...

    Think it could be the auxillary pump Andy, got heat in the car when revs above 2000 then when it settles to idle it goes cold again ??

    Lance

    Also had a look on youtube on how to test a relay...
  14. Could I have blown the heaterpump relay thats in...

    Could I have blown the heaterpump relay thats in the engine bay ??? If I took the foglight relay out and swoped it with the heater relay to test it would that be safe to try ??? Dont know how to...
  15. Might leave cap loose as I do think it is a...

    Might leave cap loose as I do think it is a airlock. The valve I noticed that the gate flap was closed so blocking the through flow of water. Might actualy take it off again tomorrow and have a...
  16. Hi Andy, Going to try that in the morning....

    Hi Andy,
    Going to try that in the morning. Everything went well with putting it back together. Does feel like a airlock but I was concerned about the steam but I think it was the catalictic...
  17. Ok here I go, Got the lambda sensor off,...

    Ok here I go,

    Got the lambda sensor off, replaced theheat shield with new bolts not the original t30 torx screws. Put all the pipes back on in the correct placement filled it up with coolant (no...
  18. Pbase is very good, I found it by accident and I...

    Pbase is very good, I found it by accident and I have it in my favorites. All credit to the guy who did it, there is a very good instilation of the alloy thermostat tower install. Along with other...
  19. Well, Got my tools out and removed the airbox...

    Well,

    Got my tools out and removed the airbox and snorkel to the throttle body, took the coil cover of and got the plug of the coil with no problems, I decided to take the spark plug out, it...
  20. Dont know much about the coolant but first thing...

    Dont know much about the coolant but first thing id check is for a wrong thermostat, that would be my first concern. Then id look at the water pump. Dont know if its possible but could the mechanic...
  21. Replies
    9
    Views
    3,403

    Just doing my lambda sensor on my 1999 xj8, had...

    Just doing my lambda sensor on my 1999 xj8, had taken the header tank off, and the heater diverter valve, then the bit#h of a job. The heatshield three times I droped my little socket wrench down...
  22. Hi, Cheers matey, will be careful with the...

    Hi,

    Cheers matey, will be careful with the clip. Think I will take the plug out and check the condition as I bought them last year from a good mate of mine and I will ask him if he had them...
  23. Just ordered new coil and lambda is it worth doing plugs too ??

    Me again,

    Biught a new lambda and coilpack but do you think its worth doing the plugs at this point too anyone know the correct ones or is it the same as the lambda, a screwball type for just that...
  24. Replies
    6
    Views
    257

    Well, my tools have arrived (lambda socket) and...

    Well, my tools have arrived (lambda socket) and my set of reversed E torx sockets for the ABS module. Bought a Lambder sensor from someone who bought it from british parts in error so he has got most...
  25. Thread: Hello

    by Lancealot1969
    Replies
    5
    Views
    113

    Hi and welcome, This is a great forum, hope...

    Hi and welcome,

    This is a great forum, hope you have fun with your Jaguar.

    Lance
Results 1 to 25 of 176
Page 1 of 8 1 2 3 4