Results 1 to 2 of 2

Thread: Jaguar Mk2/S Type bonnet hinge modification

  1. #1
    Senior Member cass3958's Avatar
    Join Date
    Jun 2014
    Location
    Torquay Devon
    Posts
    256
    Post Thanks / Like

    Jaguar Mk2/S Type bonnet hinge modification

    Several years ago when I was rebuilding my S Type I remember seeing an article on a guy who had modified his bonnet hinges on a MK2 so when he opened the bonnet it lifted in to an almost vertical position. I cannot find information of this now so is there anyone out there who can point me in the right direction please. Getting tired of having to remove my bonnet everytime I want to work on something at the rear of the engine.
    Rob.C.
    1968 Jaguar S Type 3.4 Auto Old English white
    2006 X type SE 2.0d Estate
    1966 Ford Anglia 1760 X flow
    1993 Yamaha FJ1200
    2012 Old English Sheep Dog White and Grey

  2. #2
    Senior Member
    Join Date
    Feb 2016
    Location
    OSWESTRY, Shropshire
    Posts
    992
    Post Thanks / Like
    Hello Cass,

    my memory is a little hazy (my car is not easily accessed to recheck) but I remember a sort of parallelogram linkage for the hinge. If the front pin on each side were removed and an removeable pin inserted in it's place it should then allow the bonnet to go to a near vertical position. Obviously some sort of prop will also be needed.
    I'm uncertain if it is feasible or not but it's worth looking at?

    Alec
    2004 2.5 X Type Estate, MK 2 3.8 (Long term restoration), 2.5 P.I. Triumph saloon, 564 Hymer motorhome.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •