Results 1 to 1 of 1

Thread: E-Type Plexi Light Covers

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Post Thanks / Like

    E-Type Plexi Light Covers

    Hi E-Type fans, my name is Mark Clapp and I'm from Kansas City, Missouri U.S.A. I'm an individual and make headlight covers in crack-proof plastic. I made patterns from OEM English light covers. I make them in the OEM size as a direct drop-in replacement to fit under the rubber seal and trim rings with no trimming required. The plastic is pliable and form fits to the body. This makes getting the trim rings to seat properly all around a short job even if the bonnet is slightly misshapen. I also make them in "competition" size to fully fill the recessed mounting surface and eliminate the trim rings for a nice weight savings. I have supplied these all over the world to owners and restoration shops for over five years now with no complaints. I also make light covers for C-types, D-types (both short and long nose cars), E-type lightweights, XJ-13, and the spot lights for low-drag cars. I'm asking $80USD/pair for all types ($50/pair for the spot lights) and the shipping is $20 in the U.S. or $30 to overseas. Please email me at: and feel free to call anytime at: 816-286-6982 if you have any questions.

    Mark Clapp
    Click image for larger version. 

Name:	E Type S1 Comp 3.jpg 
Views:	1 
Size:	94.8 KB 
ID:	28626Click image for larger version. 

Name:	E Type S1 1.jpg 
Views:	1 
Size:	229.1 KB 
ID:	28622Click image for larger version. 

Name:	E Type S1 2.jpg 
Views:	1 
Size:	338.4 KB 
ID:	28623Click image for larger version. 

Name:	E Type S1 Comp 2.JPG 
Views:	1 
Size:	239.1 KB 
ID:	28625
    Attached Thumbnails Attached Thumbnails E Type S1 Comp 1.JPG  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts