Results 1 to 4 of 4

Thread: Interior temperature display

  1. #1
    Senior Member YORKSHIREMAN1's Avatar
    Join Date
    Oct 2013
    Location
    LEEDS
    Posts
    253
    Post Thanks / Like

    Interior temperature display

    Hi all, noticed the right hand side of the display has gone dark, wasn't like that when I picked it up! Is it a bulb issue or the LCD display unit. If it is a bulb, is it reasonably easy to change? Thank you in advance. Carl.
    2004 Zircon blue 2.0d X type SE. Mesh Grilles top and bottom - 2004 Quartz grey 2.0d X type Sovereign has replaced it & yes it is a proper one!

  2. #2
    Senior Member Andy K's Avatar
    Join Date
    Oct 2008
    Location
    UK
    Posts
    3,308
    Post Thanks / Like
    its lit with 2 bulbs.

    The contact between the bulb wires and PCB corrod and cause the light to be off.

    I would try and ignore it! The wood round the gear selector needs to come off
    XJR 2001 Pacific Blue
    Range Rover Sport 2005 Red 2.7 TD

  3. #3
    Senior Member YORKSHIREMAN1's Avatar
    Join Date
    Oct 2013
    Location
    LEEDS
    Posts
    253
    Post Thanks / Like
    Sounds like good advice! I can live with that! However noticed the clock does not illuminate either. Is that simpler to replace the bulb?
    Regards Carl.
    2004 Zircon blue 2.0d X type SE. Mesh Grilles top and bottom - 2004 Quartz grey 2.0d X type Sovereign has replaced it & yes it is a proper one!

  4. #4
    Senior Member Andy K's Avatar
    Join Date
    Oct 2008
    Location
    UK
    Posts
    3,308
    Post Thanks / Like
    Not done the clock

    The wood around the vents will pull of though.

  5. Thanks YORKSHIREMAN1 thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •