Page 4 of 4 FirstFirst 1234
Results 31 to 34 of 34

Thread: Jaguar X300 GUIDE to: Replacing a clock in an X300 (Blue LCD)

  1. #31
    Senior Member
    Join Date
    May 2009
    Posts
    178
    Post Thanks / Like
    Step 46 - Slide the plastic trim into position



    Step 47 - Plug the ash tray connections in then pop it into place (with the ash tray closed)



    Step 48 - Tighten up the lock nuts from the gaiter hole as shown


  2. Thanks OTXOKI thanked for this post
  3. #32
    Senior Member
    Join Date
    May 2009
    Posts
    178
    Post Thanks / Like
    Step 49 - Fit the gaiter time in place




  4. Thanks OTXOKI thanked for this post
    Likes OTXOKI liked this post
  5. #33
    Junior Member
    Join Date
    Jun 2013
    Location
    hertford
    Posts
    2
    Post Thanks / Like
    hi, have just followed J Seaman's really good advice and photos on changing clock in x300, got my motorcycle/car clock from a well known auction site for the grand sum £5.45 post free..the only difference was that I left the time change button on because my soldering skills are not that refined so I have the time change button just at top of ski slope( cannot be seen from seats) but quite a neat place.. thanks J Seaman!!!! regards J Wright...

  6. #34
    Junior Member
    Join Date
    Apr 2020
    Posts
    1
    Post Thanks / Like
    Thank you. I have a new cable and a T tip soldering part on order Can you please add something about how to fix the cable by either removing the old one and replacing it with a new cable or doing something else?.

Page 4 of 4 FirstFirst 1234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •