Search Results for ‘bleed’

I thought I would tackle this subject as airlocks are common and difficult problems to fix, and it's turned out to be another marathon. There are 3 procedures in the Workshop Manual and no two were alike. We subsequently found a separate procedure for the Supercharged STR and added that too...

Hi, I searched and found out there has been extensive discussions about brake fluids, based on this informative post: https://www.jaguarforums.com/forum/general-tech-help-7/super-dot4-explained-iso-4925-class-6-a-100370/ it looks like a brake fluid of the ISO 4925 class 6 is the right choice...

Yesterday I changed the front discs and pads on my 2.2d x type. After changing them i then bleed all four callipers, as my brake pedal was quite spongy. On completion of all the work, I drove home, the brake are now constantly on! Not on so much that i cant drive, but enough to be noticed. I...

Ive had the hoses and inlet manifold off my 2000 V6 3.0L S type.. is removing the upper heater pipe the only way to bleed it? the lower two are warn but the top is cold. obviously the heater blows cold.. i keep seeing people mention a bleed screw near the expansion tank... does the 2000 model...