Jaguar Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
Guys,

Firstly, apologies for the upcoming numpty question, but had to ask anyway .....

Want to check my coolant level today, but the header tank doesn't have a MIN/MAX marker that I can see, and the book just states that the fluid should be "level with the bottom of the filler neck".

That seems a little ambiguous to me, so rather than screw it up, thought I'd ask. How far down is the bottom of the filler neck? Does it mean about an inch and a bit down - I.e. just under the bottom of the cap, or does the filler neck mean the tubed part of the header tank itself??

Signed,
Embarrassed of Essex
 

·
Registered
Joined
·
394 Posts
"level with the bottom of the filler neck" take this as instructed, leaving about an inch of an air gap between coolant and cap.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top